Introducing the EVO Series™ Electric Diaphragm Pump from ARO. This revolutionary pump takes the best features of many positive displacement pump technologies and combines them into one breakthrough product.
EVO Series™ Electric Diaphragm Pump Features
Designed for Safety
- Real Deadhead Protection: An encoder senses the speed and will slow the motor down and hold the programmed system pressure for long periods of time. The automated system enables the pump to restart the process without priming or can be programmed for automatic shutdown.
- Built-in Leak Detection: Sensors can detect diaphragm failure and shut down the pump to avoid leaks. For added protection, the pump was engineered with secondary seals to protect the actuation mechanism in the unlikely event of such an occurrence.
Designed for Control
- You can monitor and control the pump flow according to changing process parameters like flow, head, torque and others.
Designed for Efficiency
- The EVO Series™ innovative design can save more than 20% on energy costs compared with competitive models and technologies
Designed to Perform
- Unique 3-chamber design significantly reduces pulsations without additional dampener accessories
- The compact footprint fits into small operational spaces and installation is easy, with no need for a base plate or shaft alignment
|
Models
|
Aluminum
Cast Iron
Stainless Steel
|
|
Maximum Flow Rate (flood inlet)
|
54 GPM (204 l/min)
|
|
Displacement Per Cycle
|
0.25 gallons (0.95 liters)
|
|
Fluid Inlet / Outlet Hybrid - internal thread
|
ANSI / DIN Hybrid flange
|
|
Stroke
|
1.34" ( 8.6 mm)
|
|
Inlet Pressure
|
10 PSIG (0.69 bar)
|
|
Maximum Average Working Pressure
|
120 PSIG (8.3 bar)
|
|
Maximum Deadhead Pressure
|
180 PSIG (12.4 bar)
|
|
Suspended Solids Maximum Diameter
|
1/8” diameter (3.3 mm)
|
|
Wet Suction Lift
|
20 ft (8.8 m)
|
|
Dry Suction Lift
|
14 ft (4.3 m)
|
|
Diaphragm / Ball Check Size
|
1" (25.4 mm) equivalent
|
|
Peak Efficiency
|
62% (preliminary data)
|
| Maximum Pump Speed |
198 rpm |
|
Weight
|
VFD: 36 lbs (16 kg)
Motor: 236 lbs (107 kg)
Aluminum Pump Head: 231 lbs (105 kg)
Cast Iron Pump Head: 288 lbs (131 kg)
Stainless Steel Pump Head: 318 lbs (144 kg)
Pallet: 52 lbs (24 kg)
|
|
Mounting Dimension / Circumference Radius
|
3 equally placed
0.63” (∅ 16 mm) hole on 24.88” (∅ 632 mm) B.C. / 26.48" (672.6 mm)
|
|
Dimensions
*Pump with Gear Motor (not including hazardous encoder)
|
Height: 17.71" (449.9 mm) until outlet flange
*40.55" (1030 mm); Hazardous Encoder Height: 5.09" (129.4 mm)
Length: 23.61" (599.7 mm)
Width: 28.77" (730.8 mm)
|
AC Gear Motor
|
Rated Power / Phase / Voltage / Efficiency
|
2.2Kw / 3 Phase / 400V / IE3
|
|
Type and Classification
|
ATEX / ICEx
II2 G Ex db IIB T4 Gb | II2 D Ex tb IIIC T125o C Db
NEC / CEC
Class 1, Div 2 Group A-D | Class 2, Div 2 Group E-G
|
|
Gear Ratio
|
12.4:1
|
|
Encoder
|
5V 1024 pp
|
|
Motor Amps @ 400V / 50Hz
|
4.45 A
|
|
Weight
|
Standard: 119.7 lbs (54 kg)
Hazardous Duty: 154.2 lbs (70 kg)
|
|
Dimensions for Standard & Hazardous Duty
(Not including hazardous duty encoder)
|
Height: 21.71" (551.5 mm)
Length: 8.22" (209 mm)
Width: 8.22" (209 mm)
|
|
Dimensions of Hazardous Duty Encoder
|
5.09" (129.4 mm)
|
Drive - 3 voltage models available
|
Rated Power / Phase / Voltage
|
3 Kw / 3 Phase / 380V-500V
|
3 Kw / 3 Phase / 200V-240V
|
3 Kw / 3 Phase / 525V-600V
|
|
Frequency
|
50Hz / 60Hz
|
50Hz / 60Hz
|
50Hz / 60Hz
|
|
Maximum VFD Speed
|
82Hz
|
82Hz
|
82Hz
|
|
VFD Input Amps (Cont. @ 441-500V)
|
5.7 A
|
11.3 A
|
5.2 A
|
|
VFD Input Amps (Inter. @ 441-500V)
|
9.1 A
|
18.1 A
|
8.3 A
|
|
Type and Classification
(For hazardous configurations only. Please note: VFD should not be installed in a hazardous area.)
|
II (2) G [EX e] [Ex d] [Ex n]
II (2) D [Ex tb] [Ex tc]
|
II (2) G [EX e] [Ex d] [Ex n]
II (2) D [Ex tb] [Ex tc]
|
II (2) G [EX e] [Ex d] [Ex n]
II (2) D [Ex tb] [Ex tc]
|
|
Weight
|
31.5 lbs (14.3 kg)
|
31.5 lbs (14.3 kg)
|
31.5 lbs (14.3 kg)
|
|
Dimensions
|
Enclosure Size Type: A5
Height: 16.5" (420 mm); Width: 9.5" (242 mm); Depth: 9.10" (231.3 mm)
|
Enclosure Size Type: B1
Height: 18.9" (480 mm); Width: 9.5" (242 mm); Depth: 10.20" (260 mm)
|
Enclosure Size Type: A5
Height: 16.5" (420 mm); Width: 9.5" (242 mm); Depth: 9.10" (231.3 mm)
|
|
Fluid Section Service Kit: Balls, Diaphragms, Bellows and O-rings
|
637559-XX (More details below)
|
|
PRV (Pressure Relief Valve) Service Kit
|
67557-X (More details below)
|
|
Crankcase Service Kit
|
EP10-CSVX-01-A (More details below)
|
|
Crankcase Seals Service Kit
|
637561
|
|
Oil and Filter Replacement Kit
|
637562
|
|
Oil Piston Pump Assembly
|
67558
|
AFTERMARKET SERVICE KIT PART NUMBER
|
DESCRIPTION
|
|
637559-AA
|
Balls - Santoprene
Diaphragms - Santoprene
|
|
637559-TA
|
Balls - PTFE
Diaphragms - Santoprene
|
|
637559-TT
|
Balls - PTFE
Diaphragms - PTFE
|
|
637559-ST
|
Balls - 316 SS
Diaphragms - PTFE
|
|
EP10-CSVA-01-A
|
Crankcase - Aluminum Air Cap
|
|
EP10-CSVS-01-A
|
Crankcase - Stainless Steel Air Cap
|
|
67557-1
|
PRV - Aluminum
|
|
67557-2
|
PRV - Cast Iron
|
|
67557-3
|
PRV - Stainless Steel
|
Diaphragm Materials
- Long-Life PTFE
- Santoprene®
Accessories
| Motor Encoder Cable to Drive 3 meters |
67651-003 |
| Motor Encoder Cable to Drive 6 meters |
67651-006 |
| Motor Encoder Cable to Drive 9 meters |
67651-009 (comes with all completed units as standard) |
| Motor Encoder Cable to Drive 15 meters |
67651-015 |
| Motor Encoder Cable to Drive 50 meters |
67651-050 |
| Motor Encoder Cable to Drive 100 meters |
67651-100 |
| Leak Detection Sensor (Ordinary Haz) |
96270-2 |
| ZENER Barrier Haz (Pack 2 units) - Qty needed: 6 units |
97414 |
VFD Accessories
| PROFIBUS DP VI MCA 101, COATED |
130B1200 |
Optional Stainless Steel Backplate kit A5 |
130B3242 |
| DEVICENET MCA 104, COATED |
130B1202 |
Optional Stainless Steel Backplate kit B1 |
130B3434 |
| CAN OPEN MCA 105, COATED |
130B1205 |
VFD Danfoss Keypad replacement kit |
38066254 |
| ETHERNET IP MCA 121, COATED |
130B1219 |
|
|
| PROFINET MCA 120, COATED |
130B1235 |
|
|
| MODBUS TCP MCA 122, COATED |
130B1296 |
|
|
| ETHERCAT MCA 124, COATED |
120B5646 |
|
|
Gear Motor Spare Parts
| Ordinary duty encoder |
67580 |
| Hazardous duty encoder |
67576 |
| Hazardous duty encoder cable mounting kit |
67577 |
For further information regarding other aftermarket components, please contact us.
IRITS-0921-045 EN 0323_EVO Series Brochure
Download
IRITS-0323-003 EN_EVO Sales Flyer
Download
IRITS-0323-006 EN EVO Pocket Guide_A5-1
Download
IRITS-0722-018 EN_EVO Series Whitepaper_Final-2
Download
EVO-Series-Case-Study-Flint-Group-EN
Download
IRITS-0423-008 EN_EVO Case Study_Starch-Glue
Download
EVO Series Case Study_Filter Press
Download
IRITS-1222-040 EN_EVO Case Study_Concrete Washout
Download
